User Report - How do I find Inactive user information?

1) When you are in the report, you will need to untick any of the 'Role' information you do not need. 

2) In the 'User Active Status' you can then untick 'Active' and then press 'Apply Filter'. All inactive users will then show in the 'Results Table' below.

3) If you need to narrow down the data by 'Location', 'Department' or other groups, this can be done by using the 'Secondary Filters'

When selecting a secondary filter from the drop down menu, a final filter column will appear on the right hand side to allow the secondary filter criteria to be selected.

Once you have selected the required filters, press 'Apply Filter' then the data will update in the table below.

OR To simply populate data, instead of narrowing the range down. I would advise to use the 'Add more columns?' option. You are able to select a wide range of information that can be added to the results table. When you have clicked on the option you would like, you will then need to press the 'Get data' button. That will appear as soon as you choose one from the list. 

4) You can make users active again from this report by selecting the users you need to re-activate by ticking the boxes on the left hand side of the results table. Then you will need to go to the 'action' option drop down and choose 'Set User Status'. Then you can 'Choose Active Status' .

5) Once you have the information you need,  you can export this report into Excel/Csv or PDF format.